Panasonic KX-TDA15 Getting Started page 27

Setting an Extension Port to Use a DSS Console
4.3 Programming the Hybrid IP-PBX
5. Click MSN Table.
6. Click the MSN tab.
7. Configure the settings as required.
8. Click OK.
1. Under Configuration, click Slot.
2. Move the mouse pointer over the desired
extension card to display the menu of options.
3. Click Ous to set the card to out-of-service
status.
4. Move the mouse pointer over the card again,
then click Port Property.
5. For DPT Type, set the Type to DSS and assign
the Location No.
6. Click OK.
7. Under Extension, click DSS Console.
8. Select the desired pair extension number from
Pair Extension.
9. Assign features to flexible buttons as required.
10. Click OK.
Getting Started 27