Receiving Faxes Automatically; Receiving Faxes Manually - Epson WF-2830 User Manual

Make sure to load paper in your product and select your fax settings before receiving a fax.
Note: If you run out of paper during fax printing, load more paper and press the button indicated on your
product's LCD screen to continue.
Parent topic:

Receiving Faxes Automatically

To receive faxes automatically, make sure Receive Mode is set to Auto (the default setting for the
product).
To change the Receive Mode if necessary, select Settings > Fax Settings > Basic Settings > Receive
Mode.
If an answering machine is connected, make sure the product's Rings to Answer setting is set higher
than the number of rings your answering machine is set to answer a call. For example, if the answering
machine is set to pick up on the fourth ring, set the product to pick up on the fifth ring or later.
Parent topic:
Related references
Basic Settings - Fax
Related tasks

Receiving Faxes Manually

Receiving Faxes Manually
You can set up your product to receive faxes manually by setting the Receive Mode to Manual. This lets
you check for a fax tone on the connected telephone before receiving a fax.
1. To change the Receive Mode, select Settings > Fax Settings > Basic Settings > Receive Mode
and select Manual.
2. When the connected telephone rings, answer the call.
3. If you hear a fax tone, select Fax.
4. Press the # button to receive the fax.
5. Press the
6. Hang up the telephone.
Parent topic:
Receiving Faxes
Receiving Faxes
start button to start receiving the fax.
Receiving Faxes
175