Jeep Compass Operating Information Manual page 78

After selecting one of the languages, all
prompts and voice commands will be in that
language.
NOTE:
After every Uconnect® Phone language
change operation, only the language-
specific 32-name phonebook is usable. The
paired phone name is not language-specific
and is usable across all languages.
Emergency Assistance
If you are in an emergency and the mobile
phone is reachable:
• Pick up the phone and manually dial the
emergency number for your area.
If the phone is not reachable and the
Uconnect® Phone is operational, you may
reach the emergency number as follows:
• Press the
button to begin.
• After the "Ready" prompt and the following
beep, say "Emergency" and the Uconnect®
Phone will instruct the paired mobile phone
to call the emergency number. This feature is
supported in the U.S., Canada, and Mexico.
74
NOTE:
• The default number is 112. The number
dialed may not be applicable with the
available mobile service and area.
• If supported, this number may be pro-
grammable on some systems. To do this,
press the button and say "Setup", fol-
lowed by "Emergency".
• The Uconnect® Phone does slightly lower
your chances of successfully making a
phone call as to that for the mobile phone
directly.
WARNING!
To use you Uconnect® Phone System in
an emergency, your mobile phone must be:
• turned on,
• paired to the Uconnect® System,
• and have network coverage.
Breakdown Service — If Equipped
If you need Breakdown service:
• Press the
button to begin.
• After the "Ready" prompt and the following
beep, say "Breakdown service".
NOTE:
The Breakdown service number has to be
setup before using. To setup, press the
button and say "Setup, Breakdown Ser-
vice" and follow prompts.
Paging
To learn how to page, refer to "Working with
Automated Systems". Paging works properly
except for pagers of certain companies, which
time out a little too soon to work properly with
the Uconnect® Phone.
Voice Mail Calling
To learn how to access your voice mail, refer to
"Working with Automated Systems".
Working With Automated Systems
This method is used in instances where one
generally has to press numbers on the mobile
phone keypad while navigating through an au-
tomated telephone system.
You can use your Uconnect® Phone to access
a voice mail system or an automated service,
such as a paging service or automated cus-