Use Cases; Software Update; Load An Iosono Core Configuration - Barco IOSONO ONE Series Installation And User Manual

6. USE CASES

6.1

Software Update

About
This section describes how to update the Play Config software running on the IOSONO ONE. Software updates are provided by
Barco upon request. The software update function can be found at the System Tab of the setup menu, "System Tab", page 20.
To perform a software update
1. Start the Control Client an connect to the IOSONO ONE
2. Use file browser to copy software update files from your computer to the IOSONO ONE
3. Press the Configuration button in the Control Client to enter Play Config. Then press the wrench symbol and go to the System
tab.
4. Press Update press Choose.
5. Select the desired update from the list showing available updates - press Execute wait until the update was applied and the
IOSONO ONE is rebooted.
6.2 Load an IOSONO CORE configuration
About
Configurations can only be created using an IOSONO CORE. The result of exporting a preset in the Control Unit of the IOSONO
CORE is a configuration file as required by the IOSONO ONE.
To load an IOSONO CORE configuration to the IOSONO ONE
1. Start the Control Client and connect to the IOSONO ONE (see "Control Client Main Window", page 10).
2. Use file browser to copy a valid configuration file (*.icp) and (if needed) a valid license file (*.ilf) from your computer to the IOSONO
ONE (see "File Browser", page 11).
3. Press the Configuration button. When no license and/or no configuration is found, an error message is displayed and the
software automatically switches to the System tab. Otherwise, continue with step 5.
4. Press Load - go to the License label - select the license file - restart.
5. Press the wrench symbol - go to the System Tab - press Load - go to CORE Configuration - press ... at the top - select the
*.icp file and press Select - press OK. (image 6-1)
R5906747 IOSONO ONE 16/05/2017
6. Use Cases
23