Network Tab - Barco IOSONO ONE Series Installation And User Manual

5.4.3

Network Tab

Network Tab
Image 5-7
Network tab in system setup of Play Config
Item No. Element
1 IP Address
2 Net Mask
3 Gateway
4 DHCP
5 Remote Connection Type
6 Remote Port
7 Remote Terminate
Sequence
8 Reboot
A table of all remote control commands can be found in chapter "Remote control from external media controllers", page 26.
R5906747 IOSONO ONE 16/05/2017
1
2
3
4
5
6
7
Function
IP Address of the IOSONO ONE. Factory setting is 192.168.1.1
Subnet Mask for the IP connection. Factory setting is 255.255.255.0
Network Gateway for the IP connection Factory setting is 0.0.0.0
Enables DHCP mode. Network settings will be adjusted automatically if a DHCP
server is present at the network. Factory setting is OFF
TCP/IP, UDP/IP and COM/RS232 possible
Selection of the remote port for IP remote connections
CR, LF or CR/LF possible
Reboot the IOSONO ONE to resume network settings
Note: Changes of the remote control setting don´t require a reboot.
5. Play Config Software
8
19