Control Client Main Window - Barco IOSONO ONE Series Installation And User Manual

4. Control Client Software
4. Save the file
Warning: The used text editor has to be able to create a UNIX textfile. This is not possible with the Windows text editor. You
can use for example the free available editor "Notepad++". In this editor you can use the menu entry Edit EOL
Conversion UNIX/OSX Format to convert a text file to UNIX mode.
5. Plug the USB flash drive in one of the USB connections at the backside of the IOSONO ONE
6. Turn on the IOSONO ONE, the network setting from the USB flash drive will be applied automatically during boot up. Connect
to the new IP address with the Control Client software and remove the USB flash drive.
4.2

Control Client Main Window

Control Client Main Window
2
3
4
5
Image 4-2
Status display of the Control Client window
Item No. Element
1 System
2 Playback Information
3 System Status
4 Output Levelmeter
5 Configuration
6 File Browser
7 Factory Reset
10
1
Function
Network address of the IOSONO ONE
Name and position of current audio clip
Current state indicators. Same as LEDs on the front panel, see "Front Panel",
page 7
Level indicators of the output channels
Start Play Config software of the IOSONO ONE. See chapter 5 for detailed
description
Start file browser, see "File Browser", page 11
Clear user data and restore factory configuration, see "Restore Backup", page 21
6 7
R5906747 IOSONO ONE 16/05/2017