Multi-Step Speed Operation (4-Step Speed) - YASKAWA V1000 Series Installation & Start-Up Manual

How to begin rotating the motor.
1. Turn the power on to the drive.
The top screen displays.
Note: Set the drive to REMOTE.
2. With multi-function contact input terminal S7 closed, the motor
rotates forwards at 6 Hz.
Note: No run command is necessary when using the Jog frequency.
3. The drive will stop with terminal S7 open.
◆

Multi-Step Speed Operation (4-Step Speed)

Select up to 17 preset references (including Jog reference) using 5 multi-function
inputs S3 through S7. Four multi-step references can be selected using two multi-
function inputs as illustrated in Figure 4.32. Combine the first four preset
references and Jog Reference to create a multi-step speed sequence.
Multi-Step Speed Operation Parameters
■
No. Name
d1-01 Frequency Reference 1
d1-02 Frequency Reference 2
d1-03 Frequency Reference 3
d1-04 Frequency Reference 4
Digital Input
■
Terminal
S5
S6
YASKAWA TM.V1000.01 V1000 Drive Installation & Start-Up Manual (Preliminary 01-19-07)
Step
Sets the frequency reference. o1-03 determines the units, with Hz
as the default.
Frequency reference when multi-function input "Multi-Step Speed
Reference 1" (H1-
Frequency reference when multi-function input "Multi-Step Speed
Reference 2" (H1-
Frequency reference when multi-function input "Multi-Step Speed
Reference 1, 2" (H1-
Parameter Setting
H1-05 3
H1-06 4
⇒
⇒
⇒
Description
= 3) is on.
= 4) is on.
= 3 and 4) are both on.
Contents
Multi-Step Speed Reference 1
Multi-Step Speed Reference 2
4.5 Test Run
Display/Result
Motor
Page
350
350
350
350
177
4