Table of Contents
Advertisement
Intel® RAID Modules RMSP3AD160F, RMSP3CD080F and RMSP3HD080E Hardware User Guide
7.2.1
Extender Cable
The extender cable has an 8-pin Molex 43020-0601 connector on one end and a 9-pin Molex 501330-0900
connector on the other end. Two (2) versions of the cable are included in the kit, one 605 mm long and the
other 930 mm long. The routing of the cable is shown in Figure 20. Extender cable pinout
7.3
Intel® RAID Maintenance Free Backup Unit Installation
The mounting hardware included with Intel® Accessory Kit AXXRMFBU7 is designed to be compatible for
installation in to a supported Intel pedestal and rack mount server system. An alternate attachment method
may be needed when installing this accessory into a non-Intel chassis. Intel recommends using industrial-
grade Velcro* or other industrial adhesive material as an acceptable option. Refer to the server chassis
documentation or discuss an appropriate attachment method with the server chassis manufacturer to ensure
the attachment mechanism complies with the chassis requirements.
1.
Place the Super Capacitor Module and the plastic holder front-side-up on a flat, clean, static-free surface.
2.
Press the Super Capacitor Module into the plastic holder until the module clicks firmly into place, as
shown in the following figure (note that the actual shape of the product may vary).
3.
Identify the mounting location for the RMFBU assembly.
a)
In an Intel chassis, align the tabs on the holder with the holes on the mounting plate and slide the
holder until it clicks and locks into place.
b) In a non-Intel chassis, apply adhesive material to the RMFBU assembly and affix to desired mounting
location within the chassis.
41
Figure 20. Extender cable pinout
Figure 21. AXXRMFBU7 mounting assembly
Hide quick links:
Advertisement
Table of Contents
