Table of Contents
Advertisement
Configuring the LAN Console and RCA
DNS_IP1=
# ip address of name server 1
DNS_IP2=
# ip address of name server 2
DNS_IP3=
# ip address of name server 3
DNS_IP4=
# ip address of name server 4
DNS_IP5=
# ip address of name server 5
DNS_IP6=
# ip address of name server 6
Which TCP/IP port is to be treated as a console:
TCP_Port_3001=
# no / yes (default no)
TCP_Port_3002=
# no / yes (default no)
TCP_Port_3003=
# no / yes (default no)
TCP_Port_3004=
# no / yes (default no)
TCP_Port_3005=
# no / yes (default no)
TCP_Port_3006=
# no / yes (default no)
The ethernet and IP addresses undergo a syntax check:
Ethernet: xx:xx:xx:xx:xx:xx xx = 2-position hex value
IP:
x.x.x.x
x = decimal value (0 <= x <= 255)
The configuration entries for gateways, DNS (Domain Name Service) and TCP
ports are checked for 0/1. If no entry exists, "0" is taken as the default value. The
names for the RCA host and the domain must contain a string.
If DNS is wanted for the RCA, then the IP addresses of the required DNS serv-
ers must also be entered.
If the RCA is going to be operated without DNS, then the IP address and host
name of the LAN Console are determined automatically.
BOOTP service for RCA
The /opt/SMAW/SMAWxsco/sbin/mkrca script is used to activate the BOOTP ser-
vice on the LAN Console and to prepare and store the setup data that is deter-
mined for the RCA as described under "Preparing the setup data" on page 45.
mkrca uses tools from the SMAWrins package to activate the BOOTP service, i.e.
to start the DHCP service in BOOTP mode.
The mkrca script uses the work file mentioned under"Template file
/opt/SMAW/SMAWxsco/misc/setup.tpl" on page 46 for the call parameters.
mkrca - BOOTP configuration for RCA
Syntax:
mkrca <RCA_config_file>
48
Configuration
(129.103.145.11)
(129.103.145.11)
(129.103.145.11)
(129.103.145.11)
(129.103.145.11)
(129.103.145.11)
(0 | 1)
(0 | 1)
(0 | 1)
(0 | 1)
(0 | 1)
(0 | 1)
U41224-J-Z916-1-76
Advertisement
Table of Contents
