Fujitsu LAN Console Installation, Configuration And Operation page 50

Configuring the LAN Console and RCA
RCA system names should always be input in a uniform way, i.e. always either
with or without a domain suffix (e.g. utopia, not utopia.xxx.xxx.de) in order to avoid
ambiguities with the rmlancon and showlancon commands.
To execute the command, a password has to be assigned to the specified RCA
port.
rmlancon - Deleting LAN Console configuration entries
Syntax:
rmlancon {<RCA SystemName > [<RCA PortNumber >]} |
RCA SystemName
All configuration entries belonging to the specified RCA are displayed
and can be removed with "y".
RCA PortNumber
If a configuration entry is found for the specified TCP/IP port number,
which is served by the RCA, it is displayed and can be removed with "y".
-n ConsoleName
The configuration entry belonging to the specified symbolic system name
is output and can be removed with "y".
-a
All configuration entries on the LAN Console are displayed and can be
removed with "y".
showlancon - Displaying specified configuration entries
Syntax:
showlancon {<RCA SystemName > [<RCA PortNumber >]} |
The command arguments determine which configuration entries are to be dis-
played.
RCA SystemName
All configuration entries belonging to the specified RCA are displayed.
RCA PortNumber
If a configuration entry is found for the specified TCP/IP port number,
which is served by the RCA, it is displayed.
44
-n <ConsoleName> | -a
-n <ConsoleName> | -a
Configuration
U41224-J-Z916-1-76