System Unit Is Switched On; Indicators On The System Unit - Fujitsu LAN Console Installation, Configuration And Operation

Operating the LAN Console
4.4.1.3

System unit is switched on

The main switch (1) is in position I and the power LED (3) is lighting green. The
system unit can be switched to ready to operate status using the ON/OFF but-
ton (2). It is required that the ON/OFF button is pressed for 4 seconds.
4.4.2

Indicators on the system unit

1
2 3
Figure 12: Free-standing LAN Console
1. Power LED
If the power LED is lighting green, the system unit is switched on.
2. Hard disk indicator
The indicator lights when the hard disk drive of the system unit is accessed.
3. Message indicator
This indicator is intended for future applications.
4. DVD-ROM indicator
The indicator lights when the DVD-ROM drive of the system unit is
accessed. The CD must not be removed under any circumstances while the
indicator is lighting.
5. Diskette indicator
The indicator lights when the diskette drive on the system unit is accessed.
The diskette must not be removed under any circumstances while the indi-
cator is lighting.
22
LAN Console
4
5
U41224-J-Z916-1-76