Preparations For Installation; Outdoor Unit Classification; Accessories - Samsung DVM S ECO AM XMDG Series Installation Manual

Safety precautions
AA
Changes in DVM S ECO (inverter) compare to conventional models that has to noted when installing
X X For optimal distribution of the refrigerant, you must use Y-joint as branch joint for connecting outdoor units. (To not use
T-joint)
X X
You cannot operate normally if you do not complete the trial operation through outdoor unit key mode. You must use
KEY MODE to run trial operation.
X X
DVM S ECO air conditioner uses R-410A refrigerant.
X X
Check the compatibility of other products such as indoor unit, EEV kits etc. which will be connected to DVM S ECO.

Preparations for Installation

Outdoor unit classification

Appearance
DVM S ECO
Packaging material disposition
• Safely store or dispose the packaging materials.
Caution
-
Sharp metals such as nails or wooden material packaging that may break into pieces become a cause for
personal injury.
-
Make sure to store or dispose the vinyl type packaging material to keep it out of reach of children. Children
may put them over their face, which is very dangerous since it may lead them to suffocation.

Accessories

❇ ❇ You must keep following accessories until the installation is finished.
❇ ❇ Hand over the installation manual to the customer after finishing the installation.
Installation Manual(1)
6
AM080/090FXMDG
AM080MXMDG
Cap Drain(3) Drain Plug(1)


Rubber Leg(4)