Functional Description; Specifications - Milwaukee M18 BPFPCCS Operator's Manual

FUNCTIONAL DESCRIPTION

1. Tank
2. Tank cap
3. Wand storage
location
4. Carry handle
5. Spray wand
6. Trigger lock-on ^
7. Trigger handle ^
8. Trigger lock-off ^
9. Shoulder straps
10. Hose
11. Tank hook
receptacle
12. Waist strap
13. Adjustable nozzle ^
14. Nozzle holder
15. Battery
compartment
Cat. no.
491628PS
491628CS
Cat. no.
491628WS
16. Battery
compartment latch
17. Tank latch
18. Flow rate dial
19. On/Off switch
20. On/Off light
21. Water nozzle *
22. Adjustable
nozzle ^
23. Fan nozzle ^
24. Strainer
25. Tank hooks
26. Gallon markings
27. Litre markings
28. Drain cap
* 491628WS only
^ 491628PS and
491628CS only

SPECIFICATIONS

Cat. No............... M18 BPFPCCS, M18 BPFPCS,
Volts.......................................................... 18V DC
Battery Type................................................ M18
Charger Type............................................... M18
Recommended Ambient
Operating Temperature................ 0°C to 51°C
Tank Capacity................................................ 15 L
Dry Weight:
M18 BPFPCCS, M18 BPFPCS................ 7.75 kg
M18 BPFPWS.......................................... 7.85 kg
Full Weight*
M18 BPFPCCS, M18 BPFPCS............... 23.6 kg
M18 BPFPWS......................................... 23.7 kg
*the weight is based on M18B4 4.0Ah battery
Flow Rate...................................... 0.37-4.2 L/min
Tank Only (Pesticide).......................... 491628PS
Tank Only (Concrete).......................... 491628CS
Tank Only (Water)............................... 491628WS
ASSEMBLY
WARNING
battery. For specific charging instructions,
read the operator's
your charger and battery.
Removing/ Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into
place.
WARNING
for this tool. Others may be hazardous.
Connecting the Spray Wand to the Trigger
(Cat. no. 491628PS, 491628CS)
1. Insert the spray wand into the trigger
handle (1) until firmly seated.
2. Slide the nut onto the threaded
coupling and hand tighten securely (2).
3. Pull on the spray wand to be certain it is
properly secured.
4. Place the assembled trigger handle
and wand into one of the wand storage
locations.
Connecting the Nozzles
(Cat. no. 491628PS, 491628CS)
Select and screw on nozzle by job type. When
using the adjustable nozzle, adjust spray pattern
as desired by tightening/loosening the nozzle.
Connecting Water Supply or Nozzle
(Cat. no. 491628WS)
To attach water supply hose to the tool or
nozzle, push the quick connect fitting and
tool/nozzle together (1). Pull on the
connection to be certain it is properly
secured. To remove, pull the collar back
to release (2). When using the nozzle,
adjust spray pattern as desired by
tightening/loosening the nozzle.
4
M18 BPFPWS
Recharge only
charger specified for the
manual supplied with
Always remove battery pack
before changing or removing
Only use accessories
specifically recommended
Handle
TM
TM
with the