Package Content; Internal Connections - Speco 16WM Setup Manual

Package Content

Inspect the DVR's packaging. Make sure that the DVR-4WM/8WM/16WM is packed properly.
Remove all items from the box and make sure it contains the following items.
DVR-4WM/8WM/16WM

Internal Connections

1
2
LAN 10/100M
1
(RJ-45)
2 USB Port
Alarm I/O &
3
RS-485
Main
4 Monitor-
BNC
Call Monitor
5
(BNC)
Video In
6
(BNC)
2
DVR4WM/8WM/16WM
Setup Guide
Remote
Control
3 4
7
The DVR is capable of networking. Once the unit is connected to the LAN network, users can
remotely access the DVR through the remote software and SpecoRemote on a PC.
The USB 2.0 port allows users to connect an external USB device to the unit, such as a USB
ThumbDrive or Flashdrive.
The DVR provides alarm I/O and RS485 ports that offer users the flexibility required to connect
the DVR to other devices.
The DVR can connect to a monitor via a BNC connector.
The call monitor is used to display full screen video of all installed cameras in sequence. The
BNC Call Monitor connector allows users to connect the DVR with an optional call monitor.
A group of BNC connectors is provided for video input streams from installed cameras.
Power
Adaptor
5 6
8 9
Quick
Power Cord
Guide
10