Siemens SITRANS LG260 Operating Instructions Manual page 74

Register Name Register Number
Address 200
Baud Rate 201
Parity 202
Stopbits 203
Delay Time 206
Byte Oder (Float- 3000
ing point format)
Input register
The input registers consist of 16 bits. They can only be read out. Before each command, the ad-
dress (1 byte) is sent, after each command a CRC (2 bytes) is sent.
PV, SV, TV and QV can be adjusted via the sensor DTM.
Register Name Register Number
Status 100
PV Unit 104
PV 106
SV Unit 108
SV 110
TV Unit 112
TV 114
QV Unit 116
QV 118
Status 1300
PV 1302
SV 1304
TV 1306
QV 1308
Status 1400
PV 1402
Status 1412
SV 1414
74
Type Configurable Values
Word 1 ... 255
Word 1200, 2400, 4800, 9600,
19200
Word 0 = None, 1 = Odd, 2 =
Even
Word 1 = None, 2 = Two
Word 10 ... 250
Word 0, 1, 2, 3
Type Note
DWord Bit 0: Invalid Measurement Value PV
Bit 1: Invalid Measurement Value SV
Bit 2: Invalid Measurement Value TV
Bit 3: Invalid Measurement Value QV
DWord Unit Code
Primary Variable in Byte Order CDAB
DWord Unit Code
Secondary Variable in Byte Order CDAB
DWord Unit Code
Third Variable in Byte Order CDAB
DWord Unit Code
Quarternary Variable in Byte Order CDAB
DWord See Register 100
Primary Variable in Byte Order of Register 3000
Secondary Variable in Byte Order of Register 3000
Third Variable in Byte Order of Register 3000
Quarternary Variable in Byte Order of Register 3000
DWord See Register 100
Primary Variable in Byte Order CDAB
DWord See Register 100
Secondary Variable in Byte Order CDAB
SITRANS LG260 - Operating Instructions
Default Unit
Value
246 –
9600 –
0 –
1 –
50 ms
0 –
PBD-51041059