Toto WASHLET TCF802C2G Instruction Manual page 20

Maintenance
Descaling mode
Insert funnel and pour diluted agent. (1st time)
5
Funnel
Agent port
Perform descaling. (1st time)
6
(1) Press
.
Descaling will be performed.
(for about 30 seconds)
• You will hear short beep sound while
the work is in progress, and a long beep
sound upon completion.
• Water comes out from around the wand
and mist nozzle.
(2) When the beep stops
Press .
Attention!
The display shows [FILLING IN THE DESCALING AGENT (2/2)], but please DO NOT press
completed filling in descaling agent. (Descaling will not work correctly)
Dilute agent with water. (2nd time)
7
(see process on page 35)
How to dilute
8
Pour diluted agent. (2nd time)
Attention!
Please wait until funnel is empty. (Descaling will not work correctly)
38
Descaling mode
Attention!
Beaker
Please wait until funnel
is empty.
(Descaling will not work
correctly)
If any cleaning agent is
spilled on the product,
please wipe it off with a
soft cloth that has been
soaked in water and
wrung out thoroughly.
(Failure to do so may
cause discoloration)
FILL IN THE
Press
DESCALING
AGENT(1/2)
●
KEY PRESS
DEVICE IS
WORKING
PLEASE WAIT
ABOUT
30 SECONDS
DOES THE Press
BEEP STOP?
●
KEY PRESS
until you have
5
(see process on page 38)
<If you think the water pressure has weakened>
<When "Power" LED (orange) and "Energy saver" LED (orange) flash> (Continued)
Remove the funnel and put cap and cover back on.
9
Funnel
Cover
Cap
Perform descaling. (2nd time)
10
Press
.
Descaling will be performed.
(for about 60 minutes)
• Water comes out from around the wand
and mist nozzle at about 20 minutes
intervals.
After about 60 minutes, descaling agent
will be drained to the toilet.
After draining, you will hear a long beep
sound, and the LEDs on product main
body stop flashing.
<Descaling complete>
Attention!
If the spray is still weak afte performing Descaling mode please clean
If the water pressure is still weak even after performing
cleaning, please clean Spray Nozzle .
If the symptom does not improve after performing
or if the "Power" (orange) and "Energy saver" (orange) LEDs start to flash, please
and Spray Nozzle
perform Descaling mode again.
Attention!
If any cleaning agent is spilled on the
product, please wipe it off with a soft
cloth that has been soaked in water
and wrung out thoroughly. (Failure to
do so may cause discoloration)
FILL IN THE
DESCALING Press
AGENT(2/2)
●
KEY PRESS
DESCALING
IN PROGRESS
PLEASE WAIT
FOR
60 MINUTES
Returns to default display in about 30 seconds.
Water filter drain valve
.
Water filter drain valve
Descaling mode and
Water filter drain valve
Descaling mode , cleaning
39