Omron FH Series User Manual page 509

Error message
Loading the startup Scene group
failed. No read location found. Try
one of the following:
•
When reading from an external
storage device, verify connection
to the external memory device
and press OK button to do load
operation.
•
To change the Startup scene
group, select Change startup
scene.
•
If there is no external storage de-
vice attached, or no Startup
scene group set, in the Scene
group saving destination set-
tings, select Save all scene
group data in the flash memory.
Warning range shall be set within
the range from judgement lower to
upper limit.
The Search measurement result
may be NG (Insufficient memory)
with the current setting.
Save operation failed due to insuffi-
cient flash memory space in the
Sensor Controller. The current
Scene group data in Sensor Con-
troller memory will be discarded af-
ter system reboot.
The problem occurred in the sys-
tem.
FH/FHV Series Vision System User's Manual (Z365-E1)
Troubleshooting
Here are some things to consider. Choose a remedy noting the messag-
es.
•
No read location for the Scene group.
•
The external storage device containing the Scene group is corrupted.
•
The Scene group data is corrupted.
•
You have selected a non-existing Scene group.
Moreover, when this error message is displayed even though external
storage has been connected, a recognition delay of external storage hap-
pens at start-up of the Sensor Controller and loading scene group data
from the external storage may have failed.
Refer to 3-6-2 Device Information Storage Tool on page 3 - 31.
Please redefine the upper and lower warning range limits such that they
are within the range between the lower and upper evaluation limits.
Refer to Trend Monitor - Judgement Conditions (Trend Monitor) in the
Vision System FH/FHV Series Processing Item Function Reference
Manual (Cat. No. Z341).
nsufficient memory may occur during measurement. Reset the model pa-
rameters.
•
Search:
Refer to Search - Judgement is NG (Insufficient Memory) in the Vision
System FH/FHV Series Processing Item Function Reference Manual
(Cat. No. Z341).
•
Flexible search:
Refer to Flexible search - Judgement is NG (Insufficient Memory) in the
Vision System FH/FHV Series Processing Item Function Reference
Manual (Cat. No. Z341).
•
Classification:
Refer to Classification - Judgement is NG (Insufficient Memory) in the
Vision System FH/FHV Series Processing Item Function Reference
Manual (Cat. No. Z341).
•
Increase the free memory space then re-try saving to the Sensor Con-
troller.
Delete Scene, or Processing unit, or try adjusting the Measurement re-
gion of the Processing unit, or the size of the registered model.
•
Set the Save destination for the Scene group data to be an external
storage device.
Refer to 7-5 Saving Scene Groups in External Storage [Scene Group
Saving Destination Settings] on page 7 - 11.
•
Save the current Scene group data to external storage.
Refer to 9-3 Saving Setting Data to the Controller RAMDisk or an Ex-
ternal Storage Device on page 9 - 8
This is displayed when the significant abnormality occurs in the controller
system. Please contact one of our branches or regional offices.
11 What to Do!
11
11 - 3