Omron FH Series User Manual page 305

• Processing time:
The time required for the measurement process is displayed.
• Scene group name and scene name:
The scene group number and the scene number of the currently displayed scene are dis-
played.
(3) Toolbox Pane
• Edit flow:
This button starts the edit flow window that is used to edit flows. Refer to Edit Flow Window
on page 8 - 6.
• Data save:
This saves settings data to the flash memory in the Controller. If you make any changes to
the settings, make sure to click this button to save the settings.
• Switch scene:
This button switches between scene groups and scenes.
• Switch layout:
This button switches the layout number.
(4) Measurement Pane
• Camera image meas.:
This button performs a test measurement on the Camera image.
• Image file meas.:
This button re-measures saved images.
• Output:
Select this option to output the measurement results of test measurements that are per-
formed in the Adjustment Window. Do not select this option if you need to perform test
measurements on the Sensor Controller but do not need to output the results externally.
This setting menu is used for temporary setting changes while the Main Window is dis-
played. When the scene or layout is changed, the Output setting in the Layout setup is ap-
plied without saving the Output setting in the Measurement Pane. Use as appropriate for
your application.
Refer to 8-3-2 Setting the Behavior of Output Signals for Each Layout [Layout setup] on
page 8 - 22.
• Continuous meas.:
Select this option to continuously perform test measurements in the Adjustment Window.
Select the Continuous meas. option and click Measure to repeatedly execute measure-
ments.
(5) Image Pane
This pane shows the measured image.
It also displays the selected processing unit name or the Define displayed unit.
• Click on the left side of the processing unit name to display the Properties Dialog Box for the
Image Pane.
FH/FHV Series Vision System User's Manual (Z365-E1)
8 Setting Windows
8 - 5
8