Operation Mode When Battery is Low
The printer acts differently depending on the remaining battery charge and the operation mode when battery is
low.
The printer has two modes and is initially set to the mode 1.
It is recommended to replace or charge the battery when the remaining battery charge goes
The remaining battery charge is detected before printing starts and the displayed amount is
The operation mode when battery is low is selectable with the customized value. To set the
The buzzer beeps five times when the remaining battery charge goes down to the levels L or S.
Mode 1
Battery LED
Level H
Level M
Level L
Level S
Level E
*: Printing may stop in the middle.
down to the level L.
then updated. The Battery LED does not indicate the remaining battery charge detected in
real time.
customized value, see
"Software Settings" on page
You can disable the buzzer with the memory switches. To set the memory switches, see
ware Settings" on page
42.
Error LED
42.
: On
Remaining
Printing
battery charge
Approx. 60 ~ 100%
Possible
Approx. 20 ~ 60%
Possible
Approx. 10 ~ 20%
Possible
Approx. below 10%
Possible*
Approx. 0%
Impossible
Chapter 1 Product Overview
"Soft-
: Flash
: Off
Communication
Possible
Possible
Possible
Possible
Impossible
19
1