Customized Values and Memory Switches
With the customized values and memory switches, which are software switches for the printer, you can config-
ure various settings of the printer.
To set the customized values and memory switches, see
User-defined Page
You can store character data in the user-defined page (character code table: page 255) so that you can also print
characters not resident in the printer.
Maintenance Counter
With this function, printer information, such as the number of lines fed, the number of autocuts, and printer
operation time after the printer starts working, is automatically stored in NV memory. You can read or reset the
information with TM-P60II Utility, the Status API of the APD, or OPOS ADK to use it for periodical checks or
part replacement.
Maintenance counter values can also be checked with TM-P60II Utility or by executing a self-
Maintenance counter values are usually saved every two minutes except in the power saving
24
test.
status. However, if the printer power is turned off by removing the battery or using up the bat-
tery charge, the latest maintenance counter will not be saved. For detailed information about
ESC/POS commands, see the ESC/POS Command Reference.
"Software Settings" on page
42.