Device Behaviour After Ets Download; Device Behaviour After Bus Failer; Device Behaviour After Mains Failer; Device Behaviout After Main Or Bus Recovery - Panasonic WRKT4504E Series Reference Manual

Switching/Blind Actuator

3.2 Device behaviour after ETS download

Switchin Function: If output channel is configured as switching after ETS download related channel will be off.
Status led will also be off. If manual control is activated from ETS output channels can be controlled via
control buttons on device.
Blind/Shutter Function: If output channel pair is configured as Blind/Shutter after ETS download related
channels will be off. Status leds will also be off. Blind/Shutter will stay on current possion. If manual control is
activated from ETS output channels can be controlled via control buttons on device. For blind/shutter
configuration after ETS download device don't know exact position of the blind/shutter so device does not
send feedback or respond to down comments until move to the upper position.
Attention: After ETS download all blind/shutter configured channels must be moved to upper position.

3.3 Device behaviour after bus failer

This can be configured from ETS for every channel. Switchin and blind/shutter configuration has different
behaviour options.

3.4 Device behaviour after mains failer

After main failure all output channels will be off.

3.5 Device behaviout after main or bus recovery

This can be configured from ETS for every channel. Switchin and blind/shutter configuration has different
behaviour options.
9