Fluke Hart Scientific 1575 Super-Thermometer User Manual page 90

1575/1590 Thermometer Readout
User's Guide
80
(7) MAXIMUM
This displays the maximum of all measurements made on the channel since the
statistics were reset (see Section 7.2.5).
(8) MINIMUM
This displays the minimum of all measurements made on the channel since the
statistics were reset.
(9) SPREAD
This displays the difference between the maximum and minimum of all mea-
surements made on the channel since the statistics were reset.
(10) AVERAGE
This displays the average of all measurements made on the channel since the
statistics were reset.
(11) STD DEV
This displays the sample standard deviation of all measurements made on the
channel since the statistics were reset. This function can be used to measure
temperature stability or noise in the measurement system.
(12) T(C)
This displays the most recent temperature measurement in degrees Celsius.
(13) T(K)
This displays the most recent temperature measurement in Kelvin.
(14) T(F)
This displays the most recent temperature measurement in degrees Fahrenheit.
(15) T( )
This displays the resistance of the most recent measurement in ohms.
(16) T(r)
This displays the most recent measurement as a resistance ratio.
(17) T(W)
This displays the most recent measurement as an ITS-90 or IPTS-68 W ratio.
(18) CURRENT
This option displays the actual current. The actual current may differ from the
programmed value depending on the resolution and voltage limitation with the
given input resistance.
(19) CONVERSION
This displays the type of temperature conversion algorithm such as ITS-90.