Fluke Hart Scientific 1575 Super-Thermometer User Manual page 144

1575/1590 Thermometer Readout
User's Guide
134
Command Description
scn[umber][=n] read or set number of scanner channels in sequence
for modes 1 to 4; n=1...10
scun[umber][=n] read or set number of steps in user defined se-
quence; n=1...100
scuc[hannel](n)[=c] read or set channel in user defined sequence for
given step; n=1...100; c=0: input 2, 1...10: scanner
1...10
rep[etitions][=n] read or set the number of samples to measure at
each step in the sequence
scsc(ch) read scanner channel stand by current
scsc[urrent](ch)=[n] set scanner channel stand by current
0 no standby current
10 0.5 mA standby current
500 0.5 mA standby current
1000 1 mA standby current
Example
scn=10
scun=20
scuc(1)=0
rep=5
scsc(1)
scsc(1)=500