Philips Dell W2300 Service Manual page 29

2.9 Set color setting on normal color, blue preset and red preset on
User mode respectively and adjust Gain RGB and Sub-brightness on
factory mode to meet following specification.
PC Color Temp. Normal /SRGB
Note: For Original ( Natural ) color, the luminance shall be pre-
setted to 200 15nits ,also Use Minolta CA-110 for color
coordinates and luminance check. Luminance>300 nits in the
center of the screen at Original ( Natural ) color and PC
Brightness control; Contrast control at 100%.
Note : After white-D adjustment set brightness and contrast at
50%
Alignment hits:
R for x value , G for y value, B and Sub-brightness for Y value on the
Colour analyzer.
2.10 Exit factory mode and User mode, then do DC on/off and AC on/of
to reset CPU.
3. After PC mode display adjustment, TV mode and HDTV mode will
be set as PC mode automatically by software.
Display Adjustment
Blue /9300°K Red /5700°K
29
W2300
Go to cover page