Philips Dell W2300 Service Manual page 10

10
W2300
Go to cover page
OSD main MENU Displays the main On-Screen Display (OSD)
select Menu.
SLEEP timer Selects the length of time to automatically turn off
the LCD TV (off, 15-180) .
Selects different screen sizes; standard mode, 4:3,
Screen Size
full screen, and non-linear scaling.
Last TV channel selected,to access the previous
LAST channel
channel.
To call up or exit from teletext. When first press, the
TELEtext on/off:
main index page will appears with a list of the items
available. Each page has a corresponding 3-figure
number. If the selected channel does not broadcast
teletext, 100 will appear and the screen will remain
blank (in this case, exit from teletext and choose
another channel.)
Teletext page enlargement, to press this key to
Teletext
display the upper, then lower part of the screen, and
ENLARGE
then to return to the normal page size.
Overlaying text on the TV picture to activate or
Teletext MIX
deactivate screen overlay.
For Teletext quick search; Coloured zones are
RED, Green,
displayed at the bottom of the screen, the 4
Yellow,
coloured keys give access to the corresponding
Blue, Color
subjects or pages. The coloured zones flash when
buttons.
the subject or the page is not yet available.
Using the Teletext (for areas where teletext service is available)
Teletext is an information system broadcast by certain TV channels. It
can be consulted in the same way as a newspaper. It also provides
subtitles for the hard of hearing or people who are unfamiliar with the
broadcast language (cable TV network, satellite channels, etc.).
Result on Screen
Press button
Display or exit Teletext. The main index page
On/Off Teletext
presents a list of subjects to which you have
access. Each subject has a corresponding page
number (always 3 digits). Note: If selected TV
channel does not broadcast Teletext, P100
is displayed and the screen remains black. Exit
Teletext mode and choose another TV channel.
Key in the required Teletext page (3 digits). The
Selecting a
page number is displayed in the top left-hand
Teletext
corner of the screen. When the Teletext page is
Page
located, the counter stops searching. If the counter
keeps searching, it means that the page is not
available for selection. If you make a mistake when
keying in the page number, you have to finish
keying in the 3-digit number before re-keying the
correct page number.
Control and Inputs
Accessing a
Teletext page
Direct Access to an
item or Correspond
ing pages
Mix
Enlarge
Japan
Remote Control
Power On/Off
PIP On/Off and size:
INPUT selection
PIP POSITION
Digit 0- 9
SMART sound
SOUND selection
MUTE
PC/TV switch
Press the CURSOR UP button to display the
previous page and the CURSOR DOWN button to
display the next page.
The 4-colour buttons allow you to access directly
an item or corresponding pages.
Allows you to superimpose the Teletext page over
the TV program. Press the button a second time to
return to Teletext page only.
Press the button once to enlarge and view the top
half of the page. Press the button a second time to
enlarge and view the bottom half of the page.
Press the button a third time to return to normal
size page.
The remote power button turns the LCD TV ON
and OFF.
Picture in Picture (PIP): Turns PIP On/Off and
select PIP size. PIP can only be displayed with PC
(Digital or Analog) as Main input source.
Change the input selection from PC Digital, PC
Analog, Composite, S-video and Component
inputs.
Changes the PIP Position to four different corners
of the display.
Manual entry for direct access to Channel
programs for a 2 digit channel number.
Selects excellent preset audio for voice, music,
theatre, and personal settings.
TV sound mode selection, to access MONO,
STEREO and SAP.
Controls sound to mute sound or restore sound
setting.
PC/TV function swaps between last PC and Video
input viewed.