Makita PO5000C Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Sander
  5. PO5000C
  6. Instruction manual
Makita PO5000C Instruction Manual

Makita PO5000C Instruction Manual

Random orbit polisher
Hide thumbs Also See for PO5000C:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Random Orbit Polisher
PO5000C
PO6000C
DOUBLE INSULATION
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita PO5000C

Summary of Contents for Makita PO5000C

  • Page 1 INSTRUCTION MANUAL Random Orbit Polisher PO5000C PO6000C DOUBLE INSULATION Read before use.

  • Page 2: Specifications

    The following show the symbols used for the equip- The vibration total value (tri-axial vector sum) deter- ment. Be sure that you understand their meaning before mined according to 60745-2-4: use. Model PO5000C Work mode: polishing Read instruction manual. Vibration emission (a ) : 6.5 m/s h, AP Uncertainty (K) : 1.5 m/s...

  • Page 3: Save All Warnings And Instruc- Tions For Future Reference

    Save all warnings and instruc- Do not overreach. Keep proper footing and balance at all times. This enables better control tions for future reference. of the power tool in unexpected situations. The term "power tool" in the warnings refers to your Dress properly.
  • Page 4 Operations such as grinding, wire brushing 14. Do not operate the power tool near flammable or cutting-off are not recommended to be materials. Sparks could ignite these materials. performed with this power tool. Operations for 15. Do not use accessories that require liquid which the power tool was not designed may create coolants.

  • Page 5: Functional Description

    The rotating speed can be changed by turning the FUNCTIONAL speed adjusting dial to a given number setting from 1 to 5. Higher speed is obtained when the dial is turned in DESCRIPTION the direction of number 5. And lower speed is obtained when it is turned in the direction of number 1. Refer to the table for the relationship between the num- CAUTION: Always be sure that the tool is...
  • Page 6 Installing the backing pad NOTICE: Always turn the knob fully. If the knob is in the middle position, you can not turn on the tool. NOTICE: You can not change the action mode when the tool is switched on. Random orbit with forced rotation mode ► 1 .

  • Page 7: Operation

    Use another sponge pad. Run the tool to remove wax. OPERATION Polishing (Random orbit mode) Apply a felt pad gently to the work surface. CAUTION: Only use Makita genuine pads for polishing. MAINTENANCE CAUTION: Make sure the work material is secured and stable.

  • Page 8: Optional Accessories

    Cleaning dust covers OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

This manual is also suitable for:

Po6000c

Table of Contents