Pedal - MARUTI SUZUKI Baleno RS Owner's Manual

OPERATING YOUR VEHICLE

Pedal

Manual transmission
(1) (2)
EXAMPLE
CVT
EXAMPLE
(2)
(3) (3)
Clutch Pedal (1)
(For manual transmission)
The clutch pedal is used to disengage the
drive to the wheels when starting the
engine, stopping, or shifting the gearshift
lever. Depressing the pedal disengages
the clutch.
WARNING
Do not drive with your foot resting on
the clutch pedal. It could result in
excessive clutch wear, clutch dam-
age, or unexpected loss of engine
braking.
3-11
Brake Pedal (2)
Your vehicle is equipped with either front
and rear disc brakes or front disc brakes
and rear drum brakes. Depressing the
brake pedal applies both sets of brakes.
You may hear occasional brake squeal
when you apply the brakes. This is a nor-
mal condition caused by environmental
(3)
factors such as cold, wet, snow, etc.
80J2121
WARNING
If brake squeal is excessive and
occurs each time the brakes are
applied, you should have the brakes
checked by your Maruti
authorised workshop.
WARNING
Do not apply brakes continuously or
80J2122
rest your foot on the brake pedal.
This will result in overheating of the
brakes which could cause unpredict-
able braking action, longer stopping
distances, or permanent brake dam-
age.
CVT - You may hear occasional sound
when you release brake pedal while vehi-
cle is in "D" (Drive) mode and about to
move. This is a normal phenomenon.
Accelerator Pedal (3)
This pedal controls the speed of the
engine. Depressing the accelerator pedal
increases power output and speed.
NOTE:
Your vehicle is equipped with Brake Over-
ride System. If you depress both the accel-
erator pedal and the
simultaneously, the engine power output
may be suppressed.
Suzuki
brake pedal
68PH5-74E