Pedal - MARUTI SUZUKI Celerio Manual

Pedal

Manual transaxle
EXAMPLE
(1) (2)
Auto Gear Shift
EXAMPLE
(2)
(3)
Clutch Pedal (1)
(For manual transaxle)
The clutch pedal is used to disengage the
drive to the wheels when starting the
engine, stopping, or shifting the gearshift
lever. Depressing the pedal disengages
the clutch.
WARNING
Do not drive with your foot resting on
the clutch pedal. It could result in
excessive clutch wear, clutch dam-
(3)
age, or unexpected loss of engine
braking.
80J2121
Brake Pedal (2)
Your MARUTI SUZUKI vehicle is equipped
with front disc brakes and rear drum
brakes. Depressing the
applies both sets of brakes.
You may hear occasional brake squeal
when you apply the brakes. This is a nor-
mal condition caused by environmental
factors such as temperature, humidity,
snow or dust, etc.
WARNING
If brake squeal is excessive and
80J2122
occurs each time the brakes are
applied, you should have the brakes
checked by your authorised Maruti
Suzuki workshop.
OPERATING YOUR VEHICLE
WARNING
Do not "ride" the brakes by applying
them continuously or resting your
foot on the pedal. This will result in
overheating of the brakes which
could cause unpredictable braking
action, longer stopping distances, or
permanent brake damage.
Accelerator Pedal (3)
This pedal controls the speed of the
engine. Depressing the accelerator pedal
increases power output and speed.
brake pedal
3-6
76MH1-74E