Clutch Pedal; Brake Pedal; Parking Brake Reminder Buzzer; Accelerator Pedal - MARUTI SUZUKI Vitara Brezza Manual

WARNING
When parking the vehicle
extremely cold weather, the following
procedure should be used:
1) Set the parking brake.
2) Turn off the engine, then shift into
reverse or first gear.
3) Get out of the vehicle and put
chocks under the wheels.
4) Release the parking brake.
When you return to your vehicle,
you must remember to first set the
parking brake, then remove the
wheel chocks.

Parking Brake Reminder Buzzer

A buzzer sounds intermittently to remind
you to release the parking brake if you
start the vehicle without releasing the park-
ing brake. Make sure that the parking
brake is fully released and the brake sys-
tem warning light turns off.
Pedal
in EXAMPLE
(1) (2)

Clutch Pedal (1)

The clutch pedal is used to disengage the
drive to the wheels when starting the
engine, stopping, or shifting the gearshift
lever. Depressing the pedal disengages
the clutch.
WARNING
Do not drive with your foot resting on
the clutch pedal. It could result in
excessive clutch wear, clutch dam-
age, or unexpected loss of engine
braking.
OPERATING YOUR VEHICLE

Brake Pedal (2)

Your MARUTI SUZUKI vehicle is equipped
with front disc brakes and rear drum
brakes. Depressing the
applies both sets of brakes.
You may hear occasional brake squeal
when you apply the brakes. This is a nor-
mal condition caused by environmental
factors such as cold, wet, snow, etc.
WARNING
(3)
If brake squeal is excessive and
occurs each time the brakes are
applied, you should have the brakes
checked by your MARUTI SUZUKI
80J2121
dealer.
WARNING
Do not "ride" the brakes by applying
them continuously or resting your
foot on the pedal. This will result in
overheating of the brakes which
could cause unpredictable braking
action, longer stopping distances, or
permanent brake damage.

Accelerator Pedal (3)

This pedal controls the speed of the
engine. Depressing the accelerator pedal
increases power output and speed.
brake pedal
3-10
82PH0-74E