Gprs Data Log - Sony Ericsson P910i User Manual

This is the Internet version of the user's guide. © Print only for private use.
GPRS status information
When the signal strength icon is selected, network, GPRS status
information and, if applicable, GPRS error text appear.

GPRS data log

A new GPRS data log entry is created when a GPRS account
establishes a connection for the first time. It does not wait for
transfer data. If there is an existing data log associated with the
current GPRS connection, this is updated.
The GPRS data log shows a list of GPRS Internet accounts.
Where one account is active or suspended, the relevant status
icon is displayed to the left of the account.
To view information on an account
1. Select an account in the list.
2. Information on the account is shown. The data log is updated
dynamically.
Buttons allow you to delete or reset the current data. These
buttons are disabled during an active or suspended
connection.
To delete the log for an account
1. Select an account in the list.
2. Select .
GPRS data log > Delete
To reset the log of an account
1. Select an account in the list.
2. Select .
GPRS data log > Reset
To delete or reset the log of several accounts
1. Select the check boxes of the accounts in the list to be deleted
or reset.
2. Select or
GPRS data log > Reset
Session data
When the connection is deactivated, for example when the
current Internet account is disconnected, the total data sent and
received in the last session is displayed.
The information is displayed for a couple of seconds. To dismiss
the information when the flip is closed, press
Getting started with Internet and Messages
.
GPRS data log > Delete
.
177