Sony Ericsson P910i User Manual page 164

This is the Internet version of the user's guide. © Print only for private use.
MMS Advanced settings tabs
Receive These settings apply to multimedia messages that you
receive.
Select the
Play full screen
play MMS messages in full screen.
Select the check boxes to send a notification message to the
sender when a message is:
• Delivered to you:
Allow delivery notification
• Read by you:
Allow read notification
You can filter reception of incoming messages by message
type ( ,
Advertisements Information
listed in Contacts ( Anonymous senders
box will filter out messages of that category.
To receive multimedia messages only from senders listed
in your Contacts, select all other check boxes and clear the
check box for Anonymous senders
Area tab
On the Area tab you make settings related to Cell Broadcast
Services. These include both Area Information and Cell
Information services. The availability of Cell and Area
Information Services is operator-dependent.
Your network may broadcast the area code as cell information.
Your P910i can display it below the network name in the flip
closed standby view.
164 Control panel
checkbox, when you want to
) or from senders not
). Selecting a check
.
Area Information is a type of text message that is sent to all
subscribers in a certain network area, for example a local traffic
report.
To enable Cell Information
Select the check box
Cell information
To turn Area Information on
1. Check the check box. Received messages
Area information
will be automatically stored, and displayed in the list when
dismissed.
2. The list shows all the channels that you have defined on your
P910i. The check box for each channel shows if it is on
(selected, ready to receive messages) or off (cleared, not
active):
To add a new channel
1. Select .
New
2. Enter the number of the new channel in the New Channel
dialog. Channel numbers can be from 0 to 999. If there are
too many channels defined,
New
see a message:
Maximum channels on SIM
Channel numbering is operator-dependent. Please consult
your network operator for information.
To turn a channel on or off
Select the channel in the list and select the check box. To turn it
off, clear the check box.
will be disabled and you will
.