Transformer Unit Attacing And Removing - Janome Memory Craft 3500 Servicing Manual

TRANSFORMER UNIT ATTACHING AND REMOVING TRANSFORMER UNIT
To remove:
1. Remove the front panel unit (see page 4).
2. Remove the board A and C (page 17) and machine socket unit (page 22).
3. Pull out the connectors for the transformer from the board C.
4. Remove 2 screws and transformer (for 120V). Remove 2 screws and transformer (for 220-
240V).
To attach:
5. For 120V, attach the transformer unit with supporter plate 2 screws. For 220-240V, attach the
transformer unit with 3 screws (2 for the transformer and 1 for the hook).
6. Insert the connectors in the board C.
7. Attach the machine socket unit, board C, board A and front panel.
21