Board C And Fuse Attaching And Removing - Janome Memory Craft 3500 Servicing Manual

BOARD C AND FUSE ATTACHING AND REMOVING

To remove:
1. Remove the rear cover.
2. Remove 3 screws (A) and board C (see page 18).
3. Remove 3 screws (B) and remove case cover.
4. Replace fuse or board C.
To attach:
5. Attach the case cover with 3 screws (B).
6. Attach the board C with 3 screws (A).
7. Attach the rear cover.
Note: to replace fuse, pry it out of the fuse holder with a screwdriver, as shown below.
Two specified fuses are used for board C.
19