Interlogix TruPortal TP-ADD-1DIP Quick Reference page 7

The following table lists the items shown in
Callout Description
Connector J1
1 Reader 1 (access)
2 +12 VDC
3 Ground (0V)
4 Reader Data 0
5 Reader Data 1
6 Door DO (green LED)
7—9 Not used
10
Drain wire (cable shield)
Connector J2
11 Door DI (DC+)
12 Door DI Return (DC-)
13 Exit DI (REX+)
14 Exit DI Return (REX-)
15 [2]
Door Contact
16 [2]
REX
TruPortal IP-based Single Door Controller Quick Reference
Figure 10: Wiegand Wiring
Figure 10.
Wire Color
Red
Black
Green
White
Orange
[1]
Callout Description
17
1K EOL resistors typical
Connector J3
18 Reader 2 (egress)
19 +12 VDC
20 Ground (0V)
21 Reader Data 0
22 Reader Data 1
23 Door DO; green LED
24—26 Not used
27 Drain wire (cable shield). See footnote 1
1. Use 20 AWG shielded cable and terminate drain wire
(cable shield) at enclosure (see
Use plenum-rated cable if cable will be run above a
false ceiling in the air circulation space.
2. Door or Exit DIs Normally Open or Closed.
3. Include resistors for Wiegand Four-State interface.
For Wiegand Two-State interface, omit resistors.
Wire Color
[3]
Red
Black
Green
White
Orange
Figure 3 on page 4).
7