This LED illuminates when the unit is plugged in and receiving power.
The SCM268 does not have a power switch. To turn the unit off, unplug the power cord or use an external power strip with a switch. However, it can remain
plugged in as it uses very little power when idle.
⑥ POWER Switch
Country dependent.
Rear Panel
① Power Connector.
Accepts 100-120 Vac (SCM268) or 220-240 Vac (SCM268E).
② Output Connector (MIC/LINE OUT).
Transformer-balanced XLR output connector. Switchable between line and microphone level.
③ Output Level Switch (MIC/LINE OUT).
Recessed switch changes the signal level of the XLR output connector: In = Microphone Level. Out = Line Level.
④ Auxiliary Output Connector (AUX OUT).
Phono jack feeds consumer-level audio equipment. Not affected by MIC/LINE switch.
⑤ Auxiliary Level Inputs (AUX LEVEL INPUTS, 1-4).
Phono jacks connect to consumer-level audio sources.