Related Manuals for Shure SCM262
Summary of Contents for Shure SCM262
-
Page 1: Stereo Mixer
©2005 Shure Incorporated 27D8645 (Rev. 5) Model SCM262 User Guide SCM262 STEREO MIXER MÉLANGEUR STÉRÉO STEREOMISCHER MEZCLADORA ESTEREOFONICA MIXER STEREO Printed in U.S.A. -
Page 2: Important Safety Instructions
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. -
Page 3: Instrucciones Importantes De Seguridad
Este símbolo indica que la unidad contiene niveles de voltaje peligrosos que representan un riesgo de choques eléctricos. ! INSTRUCCIONES IMPORTANTES DE SEGURIDAD ! LEA estas instrucciones. CONSERVE estas instrucciones. PRESTE ATENCION a todas las advertencias. SIGA todas las instrucciones. NO utilice este aparato cerca del agua. -
Page 5: Front Panel
DESCRIPTION The Shure Model SCM262 is a stereo mixer intended for sound rein- forcement applications that integrate microphones with consumer stereo products. It incorporates two active-balanced microphone inputs with three unbalanced stereo aux level inputs. FEATURES • Designed to combine paging with background music. -
Page 6: Dip Switches
4. For microphones which require phantom power, such as con- denser microphones, place DIP switch 7 in the down position (phantom power on). 5. Connect the L/R outputs of the SCM262 to the L/R inputs of the amplifier. NOTE: If you are using a consumer stereo amplifier, use the AUX OUTs. - Page 7 AUX INPUTS AUX INPUT 3 JUKEBOX TELEVISION L/R MIC/LINE POWER SUPPLY OUTPUTS PROFESSIONAL AUDIO POWER AMPLIFIER LOUDSPEAKERS CONNECTIONS MIC INPUT 2 WIRELESS MICROPHONE SYSTEM AUX INPUTS CD PLAYER AM/FM RECEIVER TAPE DECK L/R AUX OUTPUTS CONSUMER STEREO AMPLIFIER LOUDSPEAKERS MIC INPUT 1 MICROPHONE VIDEO CAMERA TAPE DECK...
-
Page 8: Internal Modifications
5. Slide the back panel and pc board out from the rear of the chas- sis. CAUTION: When reassembling the SCM262, DO NOT OVERTIGHTEN the knob retainer nuts. Use a minimal amount of force to secure the nut (0.6-0.8 N⋅m (5-7 in⋅lb)). Damage to the internal components will result if too much force is used. -
Page 9: Supplied Hardware
Bracket Screw Rackmount Screw RACKMOUNT INSTALLATION The SCM262 can be mounted as a single unit or dual-mounted with ei- ther another SCM262 or another Shure half-rack unit such as the SCM268 or DFR11EQ. Attach the rackmount brackets using one of the... -
Page 10: Specifications
Measurement Conditions (unless otherwise specified):Tone controls centered; Line voltage 120 Vac, 60 Hz (SCM262) or 230 Vac, 50 Hz (SCM262E); full gain; 1 kHz, one channel activated; source impedances: Ω Ω Mic 150 ; Line/Aux 40 , terminations: Line/Mic/Aux 20 k... - Page 12 United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A. Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446 Europe, Middle East, Africa: Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific: Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055...