Step 6 : Setting The Set-Top Box; Before You Start - Sony SLV-X9D Operating Instructions Manual

Step 6 : Setting the Set-Top Box

If you did not connect a Set-Top Box (STB), skip this step.

Before you start...

• Turn on the VCR and the TV.
• Set the TV to the video channel.
• Connect the STB controller, remove the protection sticker on the STB controller and place it
on top of the STB, so that it hangs out over the infrared receptor on the STB front (see page
17).
• Refer to "Index to parts and controls" for button locations.
1 Press MENU, then press M/m to
highlight REGLAGES and press OK.
MENU
LECTURE
OK
2 Press M/m to highlight SET-TOP
BOX, then press OK.
LECTURE
OK
3 Press M/m/</, to highlight
CONNEX. STB and press OK.
LECTURE
OK
REGLAGES
SET-TOP BOX
REGLAGE DES CHAINES
HORLOGE
LANGUE
RETOUR
SELECTIONNER :
REGLER : OK
SORTIE
SET-TOP BOX
CONNEX. STB NON
RETOUR
SELECTIONNER :
REGLER : OK
SORTIE
SET-TOP BOX
CONNEX. STB NON
RETOUR RF
LIGNE3
SELECTIONNER :
CONFIRMER : OK
SORTIE
continued
Setting the Set-Top Box
: MENU
: MENU
: MENU
25