Table of Contents
Advertisement
Symptom
You cannot set the
channel as the Canal Plus
in the REGLAGE DES
CHAINES menu.
You cannot watch the
Canal Plus programme
when the VCR is in
standby mode.
The Canal Plus
programme is always
recorded scrambled.
The Set-Top Box control
function does not work
properly.
You cannot watch the
STB picture when the
VCR is in standby mode
or recording standby
mode.
100
Troubleshooting
Remedy
• Check that DECODEUR/LIGNE3 in the OPTIONS-2
menu is set to DECODEUR (see page 91).
• Check that DECODEUR/LIGNE3 in the OPTIONS-2
menu is set to DECODEUR (see page 91).
• Make sure the Canal Plus Scart cable is plugged securely.
• Check that VEILLE ECO in the OPTIONS-2 menu is set to
PARTIELLE or NON (see page 92).
• Make sure the Canal Plus Scart cable is plugged securely.
• Check that DECODEUR/LIGNE3 in the OPTIONS-2
menu is set to DECODEUR (see page 91).
• Check that this channel is set as Canal Plus in the
REGLAGE DES CHAINES menu (see page 47).
• Make sure you are pointing the remote commander only at
the remote sensor on the VCR and not at the STB sensor.
• Make sure you are pointing the STB controller at the
remote sensor on the Set-Top Box.
• Make sure the STB controller is connected securely.
• The STB tuner brand number may be deleted if you
disconnect it from the VCR. Re-enter the brand code
number corresponding to your Set-Top Box (see page 27).
• Check that VEILLE ECO in the OPTIONS-2 menu is set to
PARTIELLE or NON (see page 92).
• Check that DECODEUR/LIGNE3 in the OPTIONS-2
menu is set to LIGNE3 (see page 91).
Advertisement
Table of Contents
