Table of Contents
Advertisement
If your TV has a PERITEL connector
Mains lead
to mains
: Signal flow
1
Disconnect the aerial cable from
your TV and connect it to
ANTENNE ENTREE on the rear
panel of the VCR.
2
Connect ANTENNE SORTIE of
the VCR and the aerial input of
your TV using the supplied aerial
cable.
3
Connect LIGNE-1 (TV) on the
VCR and the PERITEL connector
on the TV with the optional
PERITEL cable.
This connection improves picture
and sound quality. Whenever you
want to watch the VCR picture,
press t TV/MAGN to display
the MAGN indicator in the display
window.
4
Connect the mains lead to the mains.
Note
• If the TV is connected to the LIGNE-1 (TV) connector, setting the RF channel to
OFF is recommended. In the OFF position, only the signal from the aerial is
output through the ANTENNE SORTIE connector (see page 22).
i LIGNE-1
(TV)
Aerial cable (supplied)
PERITEL cable (not supplied)
ANTENNE ENTREE
ANTENNE
SORTIE
ANTENNE
ENTREE
IN
ENTREE
AERIAL
ANTENNE
OUT
SORTIE
IN
ENTREE
AERIAL
ANTENNE
OUT
SORTIE
PERITEL
continued
Connecting the VCR
15
Advertisement
Table of Contents
