Step 3 : Connecting The Vcr - Sony SLV-SE700G Operating Instructions Manual

Step 3 : Connecting the VCR

If your TV has a Scart (EURO-AV) connector, see page 10.
If your TV does not have a Scart (EURO-AV) connector
Mains lead
to mains
: Signal flow
1
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
2
Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
3
Connect the mains lead to the mains.
Note
• When you connect the VCR and your TV only with an aerial cable, you have to tune your TV
to the VCR (see page 14).
AERIAL IN
AERIAL OUT
AERIAL IN
Aerial cable (supplied)
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
continued
Connecting the VCR
9