Searching using the index function
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
1
Insert an indexed tape into the VCR.
Press ./> RECHER INDEX.
2
• To search ahead, press > RECHER
INDEX.
• To search backwards, press .
RECHER INDEX.
The VCR starts searching, and playback
starts automatically from that point.
To stop searching
Press x STOP.
Notes
• No index signal will be added when recording starts from recording pause.
However, an index signal will be marked if you change the programme position
during recording pause.
• When you press . RECHER INDEX, if there is nothing recorded before the
selected index signal, playback may not start exactly at the index signal.
INDEX
RECHERCHE
Searching using the index function
79