Table of Contents
Advertisement
Notes
• The
motion playback.
• The
tape.
• If a tape has portions recorded in both PAL (SECAM, MESECAM) and NTSC
systems, the time counter reading will not be correct. This discrepancy is due to
the difference between the counting cycles of the two video systems.
• When you insert a non-standard commercially available tape, the remaining time
may not be correct.
• The remaining time is intended for rough measurement only.
• About 30 seconds after the tape begins playback, the tape remaining time will be
displayed.
• The station name* may not appear if the VCR does not receive station name
information signals.
* not available on SLV-SE610B
Recording what you are watching on the TV (TV Direct
Rec)
(not available on SLV-SE610B)
If you use the SMARTLINK connection, you can easily record what you are
watching on the TV (other than tapes being played on the VCR).
1
Insert a tape with its safety tab in place.
Press z ENR while you are watching a TV programme or external
2
source.
The VCR automatically turns on, then the TV indicator lights up and the
VCR starts recording what you are watching on the TV.
Tips
• The TV indicator appears in the display window after you press z ENR in some
situations such as:
– when you are watching a source connected to the TV's line input, or
– when the TV tuner preset data for the programme position is different from the
data in the VCR tuner preset.
• If there is a tape with its safety tab in place in the VCR, the VCR automatically
turns on and starts recording what you are watching on the TV when you press
z ENR.
• You can turn the TV Direct Rec function OUI and NON in the OPTIONS-2 menu
(see page 85).
48
Recording TV programmes
AFFICH information does not appear during still (pause) mode or slow-
AFFICH information will not appear while playing an NTSC-recorded
Advertisement
Table of Contents
