Table of Contents
Advertisement
To check the remaining time
Press
AFFICH. With the display on, press COMPT/DUREE REST to
check the remaining time. Each time you press COMPT/DUREE REST, the
time counter and the remaining time appear alternately. The
indicates the remaining time.
SP
Time counter
In order to get an accurate remaining time indication, be sure DUREE
CASSETTE in the OPTIONS-1 menu is set according to the tape type you
use (see page 84).
To watch another TV programme while recording
Press t TV/MAGN to turn off the MAGN indicator in the display
1
window.
2
Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
Tips
• To select a programme position, you can use the programme number buttons on the
remote commander. For two-digit numbers, press the - (ten's digit) button
followed by the programme number buttons.
• If you connect additional equipment to the LIGNE-1 (TV) or ENTREE LIGNE-2
connector, you can select the input signal using the CHOIX ENTREE or
CHAINE +/– buttons.
• The
AFFICH information appears on the TV screen indicating information
about the tape, but the information won't be recorded on the tape.
• If you don't want to watch TV while recording, you can turn off the TV. When
using a decoder, make sure to leave it on.
0 : 0 0 : 2
2
indicator
1 : 4
Remaining time
Safety tab
continued
Recording TV programmes
6
47
Advertisement
Table of Contents
