Table of Contents
Advertisement
Audio dubbing
This feature lets you record over the normal
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
Before you start...
• Open the
t
LINE-2 L
front panel and connect a playback source.
• Turn on the TV and set it to the video channel.
1
Insert a source tape into your stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
2
Insert a prerecorded tape with its safety tab in place into this (recording)
VCR. Search for the start of the section to be replaced and press
X (pause).
The VCR enters pause mode.
3
Press AUDIO DUB.
"A_DUB" and the
4
To start editing, press the X (pause) buttons on this VCR and the stereo
system (or other VCR) at the same time.
After you use this feature, the audio in playback mode is automatically
set to monaural.
To stop editing
Press x (stop) on this VCR and the stereo system (or other VCR).
(SLV-SE840N only)
o
R jacks cover on the
indicator appears in the display window.
AUDIO DUB
t LINE-2 L o R
Audio dubbing (SLV-SE840N only)
X
77
Advertisement
Table of Contents
