Table of Contents
Advertisement
Basic editing
When recording on this VCR
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press INPUT SELECT to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or LP.
1
Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X (pause) to set it to
playback pause.
3
Press REC z on this VCR to set it to recording pause.
4
To start editing, press the X (pause) buttons on both VCRs at the same
time.
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press
unwanted scene begins. When it ends, press
76
Basic editing
REC z
X
(pause) on this VCR when an
X
(pause) again to resume recording.
X
Advertisement
Table of Contents
