Table of Contents
Advertisement
1 Connecting the VCR
4
AERIAL OUT
3
l: Signal flow
yLINE-1 (TV)
1
... Connect the aerial to AERIAL IN of the VCR.
2
... Connect AERIAL OUT to the aerial input of
your TV using the supplied aerial cable.
3
... For better picture and sound, connect LINE-1
(TV) to your TV using a Scart cable if your TV
has a Scart (EURO-AV) connector.
4
... Connect the mains lead to the mains.
2 Using the Auto Set Up function
AUTO SET UP
You can preset channels.
Hold down AUTO SET UP on the VCR for more
than three seconds.
When all the receivable channels are preset,
"SET UP" disappears from the display window.
You can rearrange the programme positions to
your favourite order (see "Changing/disabling
programme positions").
Sony Corporation
Quick Start Guide
1
AERIAL IN
2
3 Tuning your TV to the VCR
RF CHANNEL
PROGRAM +/–
A If your TV does not have a Scart (EURO-AV)
connector
1
.... Press RF CHANNEL on the VCR lightly.
2
... Turn on your TV and select a programme
position for the VCR picture.
3
... Tune the TV to the same channel shown in
the VCR display window so that SONY
VIDEO CASSETTE RECORDER appears
clearly on the TV screen. Refer to your TV's
instruction manual for tuning instructions.
4
... Press RF CHANNEL.
B If your TV has a Scart (EURO-AV) connector
1
.... Press RF CHANNEL on the VCR lightly.
2
... Press PROGRAM +/– to set the RF channel
to OFF.
3
... Press RF CHANNEL.
Now you can operate your VCR.
Setting your personal code
For security, you can enter a personal code (up to
eleven characters), such as your post code. If
your VCR is stolen and then recovered, you can
identify your VCR using your personal code.
Once you enter the code, you can never change it.
Please make a note of the code to quote to the
police if your VCR is stolen.
Advertisement
Table of Contents
