Panasonic SC-PMX90 Owner's Manual page 8

Connecting a paired Bluetooth
1
Press [ ] to select "BLUETOOTH".
"READY" is indicated on the display.
2
Select "SC-PMX90" from the Bluetooth
Bluetooth menu.
®
The name of the connected device is indicated on
the display for a few seconds.
3
Start playback on the Bluetooth
Note:
• If prompted for the passkey, input "0000".
• You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for the
longest will be replaced.
• This unit can only be connected to one device at a time.
• When "BLUETOOTH" is selected as the source, this unit
will automatically try and connect to the last connected
Bluetooth ® device. ("LINKING" is indicated on the display
during this process.) If the connection attempt fails, try to
establish a connection again.
Bluetooth ® transmission mode
You can change the transmission mode to prioritize
transmission quality or sound quality.
Preparation
• Press [ ] to select "BLUETOOTH".
• If a Bluetooth ® device is already connected, disconnect
it.
1
Press [PLAY MENU] repeatedly to select
"LINK MODE".
2
Press [2, 1] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
Note:
• Select "MODE 1" if the sound is interrupted.
• When enjoying video contents with this function, the video
and audio output may not be synchronised. In this case,
select "MODE 1".
• The factory default is "MODE 2".
8
device Bluetooth
®
If the sound input level from the Bluetooth
low, change the input level setting.
Preparation
device's
®
• Connect a Bluetooth
1
Press [PLAY MENU] repeatedly to select "INPUT
LEVEL".
2
Press [2, 1] to select the level and then press [OK].
device.
®
"LEVEL 0"
^--------------------------------------------J
Note:
• Select "LEVEL 0" if the sound is distorted.
• The factory default is "LEVEL 0".
Disconnecting a Bluetooth
1
While a Bluetooth
Press [PLAY MENU] repeatedly to select
"DISCONNECT?".
2
Press [2, 1] to select "OK? YES" and then press
[OK].
Note:
• You can also disconnect the Bluetooth
and holding [
• The Bluetooth
audio source (e.g., "CD") is selected.
® input level
® device is too
® device.
"LEVEL i1" "LEVEL i2"
,. ,.
device
®
® device is connected:
® device by pressing
-PAIRING] on the unit.
device will be disconnected if a different
®
Bluetooth ® standby
When "SC-PMX90" is selected from a paired Bluetooth
device's Bluetooth ® menu, this unit will turn on
automatically from standby mode and establish a
Bluetooth ® connection.
1
Press [SETUP] repeatedly to select
"BLUETOOTH STANDBY".
2
Press [2, 1] to select "ON" and then press [OK].
Note:
• To turn the function off, select "OFF" in step 2.
• The factory default is "OFF". If this function is set to "ON",
the standby power consumption will increase.
The Bluetooth word mark and logos are registered trademarks
®
owned by Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license.
Other trademarks and trade names are those of their respective
owners.
®