Panasonic SC-PMX9 Manual

VQC9513
Wi-Fi connection guide
®
You can wirelessly stream music from an iOS device, an Android
Mac/PC to SC-PMX9's speakers. To use this music-streaming feature,
SC-PMX9 must join the same 2.4 GHz wireless network as the compatible device
through the wireless network router (access point).
≥ For information on how to connect with a LAN cable, refer to "Wired LAN connection" in the
Operating Instructions.
iOS device , Android device Wireless network
*1
or Mac/PC
*1: Refer to the Operating Instructions for the compatibility.
Screen images used in this sheet : iPhone 4S, iOS 6.0.1
Method 1
1
Press [SETUP] on the remote
control repeatedly to select
"Net Setup" and then press [OK].
"With iPod" is indicated on the display.
2
Press [SETUP] on the remote
control repeatedly to select "WPS
Push" and then press [OK].
"WPS" flashes on the display.
3
Press the WPS button on the
wireless network router.
2
The settings are completed when
"Success" is displayed and " " is
indicated on the display.
4
Press [OK] on the remote control
to exit.
*2 : The marking may differ.

Using AirPlay

The following explanations are based on an iPhone.
≥ AirPlay, the AirPlay logo, iPad, iPhone, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
≥ App Store is a service mark of Apple Inc.
≥ Android and Google Play are trademarks of Google Inc.
≥ The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
≥ The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
≥ "Wi-Fi" and "Wi-Fi Protected Setup" are marks or registered marks
of the Wi-Fi Alliance.
≥ All other trademarks are trademarks of their respective owners.
CD Stereo System
Model No. SC-PMX9
TM device or a
SC-PMX9
router
Method 2
The following explanations are based on an iPhone.
1
Disconnect iPod/iPhone/iPad
connected to the main unit.
2
Connect the iPhone to your home
wireless network.
3
Connect the iPhone to the main unit.
Choose one of the following
connections.
Lightning connector compatible iPod
touch/iPhone:
iPod touch/iPhone/iPad with
iOS 5.0 or later:
iPad
Dedicated cable supplied with the iOS
device
1
Connect the iPhone to your home wireless network.
"Settings"
2
Select "Panasonic PMX9 _ _ _ _ _ _" from the AirPlay
"Music"
Start wireless network settings
Preparation
1 Place SC-PMX9 close to the wireless network router as
possible and then point the antenna on the rear of the main
unit up as shown in the figure.
≥ Do not tilting the antenna forward or backwards when it is pointing up.
2 Connect the AC mains lead while the LAN cable is disconnected.
3 Turn this system on.
4 Follow the chart below to choose the network setting method.
≥ If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced
setting, refer to "Method 4" in the operating instructions.
4
Press [SETUP] on the remote
control repeatedly to select
"Net Setup" and then press [OK].
"With iPod" is indicated on the display.
5
Unlock your iPhone and then
press [OK] on the remote control.
6
A message will pop-up on the
iPhone. Allow the iPhone to share
the wireless network settings.
7
The settings are completed when
"Success" is displayed and " "
is indicated on the display.
8
Press [OK] on the remote control
to exit.
"Wi-Fi"
*3: You may be prompted for the password. Enter the password of your home wireless network.
"Panasonic PMX9 _ _ _ _ _ _"
Does your wireless network router support
WPS (Wi-Fi Protected Setup
Yes
Are you using an iPod touch/iPhone/iPad?
Is the iOS version 5.0 or later?
Yes
Method 3
You can make the wireless network
settings with the app, "Panasonic
Stereo System Network Setup" (for
free).
If you're using an Android device,
download the app at Google Play TM . If
you're using an iPod touch/iPhone/
iPad, download it at the App Store.
Preparation
≥ Connect your smartphone to your
home wireless network.
≥ Check the password for your home
wireless network.
1
Press [SETUP] on the remote
control repeatedly to select
"Net Setup" and then press [OK].
"With iPod" is indicated on the display.
2
Press [SETUP] on the remote
control repeatedly to select
"Manual" and then press [OK].
Your home wireless
Turn on
network name
(SSID)*3
icon and start play.
TM )?
No / Do not know
No
3
Start "Panasonic Stereo System
Network Setup" on your
smartphone and follow the
indications.
∫ Note for the iOS version
After step 3
1 Enter the password for the home
wireless network to which the iOS
device is connected.
2 When a message instructing you
to connect the iOS device to this
system is displayed, press the
home button.
3 On the Wi-Fi network selection
screen in "Settings", select
"00 Setup _ _ _ _ _ _".
4 When a message indicating the
completion of the connection to
this system is displayed, restart
the app.
5 When a message indicating the
completion of the Wi-Fi setup of
this system is displayed, close the
app, and then check the operation
of AirPlay, etc.
Play starts.
(with a slight delay)