About Bluetooth; Operations - Panasonic SC-PMX90 Owner's Manual

About Bluetooth

®
Panasonic bears no responsibility for data and/or
information that is compromised during a
wireless transmission.
Frequency band used
• This system uses the 2.4 GHz frequency band.
Certification of this device
• This system conforms to frequency restrictions and
has received certification based on frequency laws.
Thus, a wireless permit is not necessary.
• The actions below are punishable by law in some
countries:
- Taking apart or modifying this system.
- Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth
SIG, Inc.
• Depending on the specifications and settings of a
device, it can fail to connect or some operations can be
different.
• This system supports Bluetooth security features. But
®
depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
device.
Range of use
• Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the
environment, obstacles or interference.
Interference from other devices
• This system may not function properly and troubles
such as noise and sound jumps may arise due to radio
wave interference if this system is located too close to
other Bluetooth devices or the devices that use the
®
2.4 GHz band.
• This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too strong.
Intended usage
• This system is for normal, general use only.
• Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals, laboratories,
etc).
®
®
Bluetooth

operations

®
By using the Bluetooth ® connection, you can listen to the
sound from the Bluetooth audio device from this system
®
wirelessly.
• Refer to the operating instructions of the Bluetooth
device for details.
Connecting via Bluetooth
Preparation
• Turn on the Bluetooth ® feature of the device and place
the device near this unit.
Pairing with Bluetooth ® devices
1
Press [ ] to select "BLUETOOTH".
If "PAIRING" is indicated on the display, go to step 3.
2
Press [PLAY MENU] to select "PAIRING" and
then press [OK].
Alternatively, press and hold [
unit.
3
Select "SC-PMX90" from the Bluetooth
Bluetooth ® menu.
The MAC address (e.g., alpha-numerical string that
is unique to each set) may be displayed before this
unit is displayed.
The name of the connected device is indicated on
the display for a few seconds.
4
Start playback on the Bluetooth
®
menu
®
-PAIRING] on the
® device's
device.
®
7