Panasonic SC-PMX90 Owner's Manual page 15

USB
The USB device or the contents in it cannot be read.
• The format of the USB device or the contents in it is/
are not compatible with the system.
Slow operation of the USB device.
• Large content size or large memory USB device takes
longer time to read.
The elapsed time shown is different from the actual
play time.
• Transfer the data to another USB device or backup the
data and reformat the USB device.
Bluetooth ®
Pairing cannot be done.
• Check the Bluetooth device condition.
®
The device cannot be connected.
• The pairing of the device was unsuccessful or the
registration has been replaced. Try pairing the device
again.
• This system might be connected to a different device.
Disconnect the other device and try pairing the device
again.
• If "MODE 2" is selected in "LINK MODE", select
"MODE 1". ( 8)
• If the problem persists, turn the unit off and on, then try
again.
The device is connected but audio cannot be heard
through this system.
• For some built-in Bluetooth devices, you have to set
®
the audio output to "SC-PMX90" manually. Read the
operating instructions for the device for details.
The sound is interrupted.
• The device is out of the 10 m (33 ft) communication
range. Bring the Bluetooth device closer to this
®
system.
• Remove any obstacle between this system and the
device.
• Other devices that use the 2.4 GHz frequency band
(wireless router, microwaves, cordless phones, etc.)
are interfering. Bring the Bluetooth
this system and distance it from the other devices.
• Select "MODE 1" for stable communication. (
AUX
"AUX-IN auto play" does not work.
• You have not connected the external music device
correctly.
• Increase the volume of the external music device.
• If "OFF" was selected during "AUX-IN AUTO PLAY",
select "ON".
Unintentional automatic switch to AUX source.
• Connect the audio cable to the system only after all the
other connections have been made.
Noise may be detected when connecting the external
music device and it will cause the set to automatically
switch to AUX source.
PC
The PC does not recognize this system.
• Check your operating environment. (
• Restart the PC, turn off and on this system, and then
reconnect the USB cable.
• Use another USB port of the connected PC.
• Install the dedicated driver if using a PC with Windows.
device closer to
®
8)
Main unit displays
"--:--"
• You connected the AC power supply cord for the first
time or there was a power failure recently. Set the
clock.
"ADJUST CLOCK"
• Clock is not set. Adjust the clock accordingly.
"ADJUST TIMER"
• Play timer is not set. Adjust the play timer accordingly.
"AUTO OFF"
• The unit has been left unused for about 20 minutes
and will shut down in a minute. Press any button to
cancel it.
"CHECKING CONNECTION"
• The unit is checking the connected USB device.
"DIMMER"
• Appears 10 seconds after the volume is turned to "0".
13)
"ERROR"
• An incorrect operation was done. Read the instructions
and try again.
"F " / "F " ("
• There is a problem with this unit.
Disconnect the AC power supply cord from the AC
outlet, reconnect it to the outlet after about 30 seconds.
Wait for about 10 seconds, then turn on the unit. If the
problem still persists, disconnect the AC power supply
cord and consult your dealer.
"NO DEVICE"
• The USB device is not connected. Examine the
connection.
"NO DISC"
• You have not put in a disc or put in a disc that the
system cannot play.
"NO PLAY"
• Examine the content. You can only play supported
format. ( 16)
• The files in the USB device can be corrupted. Format
the USB device and try again.
• The unit may have a problem. Turn the unit off and
then on again.
" stands for a number.)
15